You have to learn the codes into the HTR 2 from your original remotes. The only way to learn commands without the original remote is through the HTR 2 PC Interface kit, which is available through our dealers/distributors. Using the interface you can download remote codes from websites such as www.remotecentral.com and use them with the HTR 2.
However, if you have the original remote, it would be quicker just to learn it in yourself. Please consult the owner's manual for an explanation of how to learn remote codes into your HTR2. If you need additional help, please contact your dealer where you purchased your remote for assistance.
Example: Copy the pause command from the CD key to the AMP [ || ] key:
- On the HTR 2, simultaneously press-and-hold [AMP] and [•] (record); the Learn LED turns steady green.
- Press [ || ] (pause); the Learn LED turns amber.
- Press [CD]; press [ || ] (pause); the Learn LED turns green.
- Press [AMP] again to exit the learning mode.