The AMP 4 remote control manages the primary functions of the C 316BEE and includes extra controls for operating NAD CD players remotely. It works up to a distance of 23 feet (7 meters). When a command is received from the remote, the Standby LED indicator blinks.
| 1 |
ON |
Power up the unit from Standby mode to operating mode. |
| OFF | Switch the unit to Standby mode | |
| 2 | MUTE | Press the [MUTE] button to temporarily switch OFF the sound to the speakers or headphones. Press [MUTE] again to restore sound. |
| 3 | VOLUME [˄/˅] | Increase or decrease loudness level. |
| 4 | INPUT SELECTORS | Refer to the corresponding labels printed on the remote control buttons to make use of these functions. The input selector buttons perform the same functions as the buttons labeled the same on the front panel. |
|
5 |
CD PLAYER CONTROL (for use with NAD CD Player): Some of the control buttons below are applicable only to specific NAD CD Player models; check the owner’s manual of your NAD CD Player for control button compatibility. | |
| ⏹ | Stop playback. | |
| ⏸ | Pause playback temporarily. | |
| ⏵ | Start playback. | |
| ⏏ | Open or close the disc tray. | |
| ⏭ | Go to the next track or file. | |
| ⏮ | Go to the beginning of the current/ previous track or file. | |