The SR 9 can store a unique set of default NAD codes for each DEVICE SELECTOR "page." If the original default library does not control your NAD CD player, DVD player, or other components, follow the procedure below to change the library code. Refer to the table below for a list of applicable NAD Library Codes and their corresponding NAD models.
LOAD ANOTHER LIBRARY CODE
Example: Load NAD DVD Player T 517 library codes to SR9's CD device.
- Press and hold the [CD] in the DEVICE SELECTOR section of the SR9.
- While holding down the [CD] device button, press 2 and 2 using the SR9's numeric buttons. 22 corresponds to the library code for T 517.
- Press ENTER while still holding down the [CD] device button. The [CD] device selector will flash once to indicate the successful library input. Both the [CD] device selector and [ENTER] buttons can now be released.
TABLE OF LIBRARY CODES APPLICABLE TO SR9 REMOTE CONTROL
IMPORTANT!
The SR9 remote may not contain all the control buttons applicable to the mentioned NAD products. You can use the remote control of the specific NAD product for a full set of applicable remote control buttons.
| LIBRARY CODE | PRODUCT DESCRIPTION |
| 10 | Default library for “AMP” page |
| 11 | Zone 2 |
| 12 | Default library for “AMP” page without discrete ON/OFF (toggle ON/OFF) buttons |
| 20 | Default library for “CD” page; C 515BEE, C 545BEE, C 565BEE. |
| 21 |
T 535, T 585, M55, DVD section of: L 54, VISO TWO, VISO FIVE. |
| 22 | T 513, T 514, T 515, T 517 |
| 23 | T587 |
| 31 | IPD 2 |
| 40 | Default library for “TUN” page. Loaded with Tuner default codes. Applicable also to the Tuner section of: C 725BEE, T 175, T 737, T 747, T 755, T 765, T 775, T 785 |
| 41 | C 422, C 425 |
| 42 | C 445 |
| 50 | DAC |