Hotspot Mode
NAD CS1 should be in the Hotspot Mode (the Power Indicator LED alternates Green and Red) before you connect to or change the wireless network.
To enable the Hotspot Mode on NAD CS1, press the Standby button on the front panel for more than 5 seconds.
Standby Mode
Auto – By default, NAD CS1 will go into a low-power Standby Mode after 15 minutes of no playback on the device (the Power Indicator LED turns Amber). This helps reduce power consumption and improves longevity by allowing it to cool down between uses.
Manual – To enable the Standby Mode on the NAD CS1, press the Standby button on the front panel for 2-5 seconds and release (the Power Indicator LED turns Amber).
Disable – To disable the Standby Mode, short press (less than 1 second) the Standby button on the front panel.
Note: When the Standby Mode is enabled, the output on Trigger OUT is 0V.