If NAD CS1 is connected to an existing network, and you would like to connect it to a different network, follow these methods:
A. Wired Connection
For the Wired connection, rewire the Ethernet connection of NAD CS1 to the required new router.
B. Wireless Connection
Control Panel
- Launch the Google Home App on the connected iOS or Android device.
- Select the NAD CS1 device from the list.
- On the NAD CS1 device screen, tap the
icon in the upper-right corner.
- Under General, tap Device information
- Note the IP address (under Technical Information).
- On any device (connected to the same network as NAD CS1), enter the IP address in a browser.
- Choose the required network on Select Your Network.
- Enter the Password.
- Select Save.
The required network settings are applied.
Google Home App (iOS or Android)
- Launch the Google Home App on the connected iOS or Android device.
- Select the NAD CS1 device from the list.
- On the NAD CS1 device screen, tap the
- Under General, tap Device information
- Next to WiFi, tap Forget. (You will be redirected to the Google Home App setup screen)
- Follow the steps in our Help Centre Article to reconfigure NAD CS1 with a different WiFi network.
Standby button
Alternatively, you can enable Hotspot Mode on NAD CS1 and follow our Help Centre Article steps to reconfigure the wireless network connection.
To enable the Hotspot Mode on NAD CS1, press the Standby button on the front panel for more than 5 seconds (the Power Indicator LED alternates Green and Red).