The SR10 can hold a different library of default NAD codes for each of its DEVICE SELECTOR "pages." If the original default library doesn't control your NAD CD player, BluOS player, or Tuner, follow these steps to change the library code. Also, refer to the table below for a list of applicable NAD Library Codes with their corresponding NAD models.
LOAD ANOTHER LIBRARY CODE
Example: Load NAD DVD Player T 517 library codes to SR10's AUX device.
- Press and hold AUX in the DEVICE SELECTOR section of the SR10.
- While holding down the AUX device button, press 2 and 2 using the SR10's numeric buttons. 22 corresponds to the library code for T 517.
- Press ENTER while still holding down the AUX device button. The AUX device selector will flash once to indicate the successful library input. Both the AUX device selector and ENTER buttons can now be released.
TABLE OF LIBRARY CODES APPLICABLE TO SR10 REMOTE CONTROL
IMPORTANT!
The SR10 remote may not contain all the control buttons applicable to the mentioned NAD products. You can use the remote control of the specific NAD product for a full set of applicable remote control buttons.
LIBRARY CODE | PRODUCT DESCRIPTION |
10 | Default library for “AMP” page |
11 | Zone 2 |
12 | Default library for “AMP” page without discrete ON/OFF (toggle ON/OFF) buttons |
20 | Default library for “CD” page; C 515BEE, C 545BEE, C 565BEE. |
21 |
T 535, T 585, M55, DVD section of: L 54, VISO TWO, VISO FIVE. |
22 | T 513, T 514, T 515, T 517 |
23 | T587 |
30 | Default library for “BLS” page |
31 | IPD 2 |
40 | Default library for “AUX” page. Loaded with Tuner default codes. Applicable also to Tuner section of: C 725BEE, T 175, T 737, T 747, T 755, T 765, T 775, T 785 |
41 | C 422, C 425 |
42 | C 445 |
50 | DAC |