Note: The Learn LED is located between the ON and OFF buttons.
Learning Commands with the HTRM 2
- Positioning: Begin by positioning the HTRM 2 "nose-to-nose" with the source remote so the infrared windows of both devices are about 2 inches apart.
- Enter Learning Mode: On the HTRM 2, press and hold both a DEVICE SELECTOR key and the [RES] key simultaneously for 3 seconds until the Learn LED turns steady Green.
- Select Function Key: Press the function key on the HTRM 2 that you want to teach a command; the Learn LED will turn Amber.
- Teach Command: Press and hold the corresponding function key on the source remote. The HTRM 2’s Learn LED will flicker amber for a second or two, then turn solid Green, indicating the command is learned.
- Exit Learning Mode: Press the HTRM 2’s DEVICE SELECTOR key again to exit the learning mode.
Troubleshooting
- If the Learn LED does not flicker Amber, vary the distance between the remotes.
- If the Learn LED turns Red instead of Green, the command from the source remote cannot be learned. In rare cases, some IR formats may be incompatible with the HTRM 2.
Example: Learning "BD Pause"
- Positioning: Position the HTRM 2 and your BD player’s remote as described above.
- Enter Learning Mode: On the HTRM 2, press and hold [BD] and [RES] simultaneously until the Learn LED turns steady Green.
- Select Function Key: Press the HTRM 2’s Pause [⏸] key; the Learn LED turns Amber.
- Teach Command: Press and hold the corresponding Pause key on your BD player’s remote control; the HTRM 2’s Learn LED flickers Amber and then turns solid Green, indicating the command is learned.
- Exit Learning Mode: Press [BD] again to exit learning mode.
Additional Notes
- DEVICE SELECTOR keys can be configured to learn a command.
- To execute a function assigned to a configured DEVICE SELECTOR key, press and hold the key for at least 2 seconds.
- A short press of a configured DEVICE SELECTOR will only switch the active device.
Cancel Learning Operation
To cancel configuring a key, press the active DEVICE SELECTOR key before the learning process is complete; the Learn LED will turn Red.