Articles in this section

See more

How to enable Standby Mode in M33?

Updated

Activate Auto Standby Mode to allow the M33 to automatically switch to Standby after 30 minutes of inactivity or no source input. In this low-power state (less than 0.5W), the device is inaccessible via the network or BluOS Controller App.

Vacation Mode fully powers off the M33, rendering it inaccessible via the network or BluOS Controller App. To enable, press and hold the Standby button for 5 seconds until the Status Indicator turns solid Amber.

To maintain network/BluOS accessibility on either of these Standby modes, enable LAN/BluOS in Standby.

Auto Standby Mode

When Auto Standby Mode is enabled, the M33 automatically switches to Standby Mode when there is no user interaction or active source input for 30 minutes. The Player, powers off with minimal power consumption (less than 0.5W), rendering it inaccessible via the network or BluOS Controller App. To keep the Player accessible via network or BluOS when on Standby, enable the LAN/BluOS in Standby option.

To enable Auto Standby Mode, perform the following steps:

  1. On the front panel display, tap the MENU button (3 lines) in the upper-left corner.
  2. Select the Settings icon 007_Settings_button.png in the left menu.
  3. Tap Player and scroll to the Auto Standby option.
  4. Tap the Auto Standby toggle option to enable or disable the Auto Standby function:
    • Enabled: The player automatically switches to Standby Mode when there is no user interaction or active source input for 30 minutes. To wake it up, touch the front panel.
    • Disabled: Automatic standby mode is disabled.

Vacation Mode

When set to Vacation Mode, M33 will fully power off (no network or Amplifier activity) and will no longer be accessible via the network or in the BluOS Controller App with minimal power consumption (less than 0.5W).

To keep the Player accessible via network or BluOS when on Vacation mode, enable the LAN/BluOS in Standby option.

To enable the Vacation Mode, press and hold (5 seconds) the Standby button on the top panel, and the Status Indicator (NAD Logo on the top panel) turns to solid Amber.

To wake up the Player from the Vacation Mode, press the Standby button on the top panel. The Status Indicator will change from Amber to solid White.

Related articles