You can enable or disable a source using this option. This is particularly useful if only a few sources are used regularly, allowing you to directly select the source from the front panel and bypass unused sources.
For C389, when the MDC2 BluOS D module is installed you have the flexibility to disable specific sources, with the expectation that the Source Input Selector buttons on the SR10 remote will be reassigned accordingly. Learn more.
For C658, when the MDC HDM 2 module is installed you have the flexibility to disable specific sources, with the expectation that the Source Input Selector buttons on the SR9 remote will be reassigned accordingly. Learn more.
Enable or disable Source:
To enable or disable a Source in the C389/C399/C658, perform the following steps on the front panel:
Front Panel | |
Use the navigation [] buttons to go through menu options and selections. The middle round button is designated as the [ENTER] button.
|
- Press the [◠] Navigation button on the C389/C399/C658 once or repeatedly until a Source screen is displayed.
- Press the [◡] Navigation button once for the Main Menu options (Settings, Source Setup, and System Info).
- Use the [] Navigation buttons to navigate to the Source Setup screen.
- Press [◡] to open the Source Setup screen.
- Use the [] Navigation buttons to navigate to the required source.
- Press [◡] to select the required source. The Enable Source screen for the selected source will be displayed.
- Press [◡] again to display Yes or No.
- Use the [] Navigation buttons to select Yes or No:
Yes: Enable the selected source.
No: Disable the selected source. - Press [◠] multiple times to save the settings and return to the Source screen accessed before Step 1.